VITEK Innovation!

Home / Products / Legacy Products / VT-TR1M


Passive UTP Transceiver (Discontinued)

  • Up to 2000' B/W or 1300' Color video signal transmission
  • Easy to install screw terminals
  • Reduces exposure to ground loops and electrical interference
  • Uses CAT5 cable for ease of installation
  • Passive - No External Power Required!

The VT-TR1M Passive UTP Transceiver combines the ultimate in Affordability and ease of installation. The VT-TR1M is capable of transmitting up to 2000' in of B/W video or 1300' in Color across 24AWG CAT5 cable. The no power requirement of passive transmission, the ease of thin, light weight CAT5, and the easy to install terminal screws make installation a breeze.

BNC Video Input1

Video Input1V p-p, 75 Ohms

UTP Output1

Transmission Distance2000' in of B/W / 1300' in Color

Cable RequirementCAT5 Twisted Pair (24AWG) or CAT2, 3, 4, or 6

Video FormtRS170, NTSC, PAL, SECAM, CCIR

Maximum Input2VPP

Insertion LossLess than 2dB per pair over the frequency range from DC to 5Mhz

Return LossGreater than 15dB over the frequency range from DC to 5Mhz

Frequency responseDC to 5 Mhz

AttenuationDC to 5 Mhz 1.5dB Max

Common Mode Rejection15Khz to 5 Mhz , 60 dB

Transient ImmunityX

ImpedanceCoax, Male BNC: 75 Ohms / Terminal Block: 100 Ohms

PowerNo power required

Wire typeUTP (Unshielded Twisted Pair) 24 AWG or thicker

CategoryCategory 2, 3 , 4, 5, 6 or Better

UTP connectionTerminal Blocks

Case ABS Plastic

FCC, CE , C-TICK ApprovalYES

Temperature range-10 ~ 74C

Humidity range0 ~ 95%

Dimensions2.4" x 0.75" x 0.6" (61mm x 19mm x 15.3mm)

Spec SheetVT-TR1M: Spec Sheet DOWNLOAD 9/27/2016

ManualVT-TR1M: Manual DOWNLOAD 9/27/2016