|
|
VT-IPS1
1 Channel IP Server
-
Converts an analog signal into a IP stream using MPEG4 and JPEG compression
-
Creates an IP based video network using existing analog cameras
-
Triple Compression & Streaming with 2 MPEG4 and 1 JPEG encoders with Independently selectable Resolution, Frame, and Bit Rates
-
4 Selectable Resolutions up to up 720 x 480: D1, Half D1, 2CIF, or CIF
-
Individually selectable frame rate up to 30fps per MPEG4 stream (2 streams per channel)
-
CBR/VBR Selectable Bitrate (CBR: 100kbps ~ 5Mbps / VBR: low, normal, high)
-
SMS Email Alarm Notification with Alarm Relays
-
10/100Mbps Network Interface
-
Bi-directionsl, full duplex audio per video channel (1, 2 or 4 channels)
-
Remote configuration and status with web-based interface
-
Supports up to 50 concurrent remote connections via Software or Web Browser
|
|
|
| VITEK IP Servers simultaneously transmit two independent MPEG4 video streams capable of achieving 60 pictures per second at D1 resolution. Each stream can be individually customized with its own resolution and picture quality settings allowing the user to minimize storage requirements and maximize transmission efficiency while still maintaining high quality video. Moreover, the video stream can be easily switched to JPEG mode in low bandwidth applications to increase picture clarity without sacrificing the fluidity of streamed video. |
| VT-IPS1 Specifications: |
| Supported Video Compressions |
MPEG-4 (ISO/IEC 14496-2 LEVEL 1,2,3), Profiles:Simple profile
JPEG |
| Supported Resolutions |
MPEG4 : 4CIF,2CIF,CIF,QCIF
JPEG : 2CIF,CIF,QCIF |
| Frame Rate |
NTSC : Up to 30 fps in all resolutions
PAL : Up to 25 fps in all resolutions
MAX : D1 60fps(CIF 240fps) |
| Video Streaming |
MPEG-4 Controllable frame rate & bandwidth, constant & variable bit rate
MPEG-4 Dual Streaming (2 MPEG-4 encoder) |
| Image Settings |
Image Color Setting : Brightness, Hue, Contrast |
| Audio Support |
Two way audio, G.723 4bit 8Khz Full Duplex |
| Security |
Multiple user access levels with password protection.
Managing of users and Configuration.
Encrypted user ID/password . |
| Alarm & Event Management |
Events triggered by motion detection, external inputs, video loss Image.
Image upload over FTP
Notification over TCP, email, and external outputs.
Pre/Post alarm recording. |
| Connectors |
BNC Composite input & looping output, Autosensing Ethernet 10baseT/ 100BaseTX RJ-45, Alarm Input terminal block 2 NO/ NC input and relay output, MIC in 1 port, Spaker out 1 port, RS232 1port, RS485 Input terminal block, Power Input 12VDC |
| Power |
12VDC max 1A (12Watts) |
| Operating conditions |
32˚~50˚ F (0˚~50˚ C) / 85% RH. Max. Non-condensing |
| Video Access from web browser |
Live view up to 20 clients |
| Minimum web browsing requirements |
Pentium 4 CPU 1.2GHz or higher, or equivalent AMD, 128 MB RAM, AGP graphics card 32 MB RAM, DirectShow
Windows XP, 2000, DirectX 9.0c or later Internet Explorer 6.x or later
|
| Supported Protocols |
HTTP, TCP/IP, UDP, IGMP, ICMP, DHCP, NTP, ARP, DNS, DDNS, SOCKS, FTP |
| Approvals |
CE, FCC, MIC
|
| Dimensions (W x H x D) |
8.74" x 1.50" x 5.83" (222 x 38 x 148 mm) |
| Weight |
2.2 lbs. (1kg) |
|
|
|
|
