VITEK Innovation!

Home / Products / Legacy Products / VTS-RV1


B/W Rear Vision System (Discontinued)

  • Perfect as rear view mirror for trucks, buses and special vehicles
  • Kit includes both Monitor and Camera
  • System automatically turns on when the vehicle is shifted into reverse
  • More than 900 TV Lines of resolution
  • Camera has water proof aluminum die-cast chassis
  • Easy to operate front panel controls on monitor


ConstructionPlastic cabinet

FinishGrey soft coat finish

Picture Tube5.5" inches

Weight (per unit)N.W./G.W.:3.97/6.61lbs

Front Panel ControlPower ON/OFF: push button switch Contrast/Bright: rotary control A/B Camera Switch: push button switch Day/Night Bright Switch: push button switch

Supplied AccessoriesMounting bracket x1 Screw (for bracket) x2 Sun Hood x1

Power Source12~24 VDC

Power Consumption12.5W

Input Signal0.7 to 1.5V peak-to-peak composite video

Input Impedance75 Ohm


ResolutionMore than 900 TV Lines

Operation System Horizontal : 15,750Hz +/- 400Hz Vertical: 60Hz

Input/Output Connector4-pin mini din jack

Power ConnectorRed: Positive 12~24 VDC input Black: GND Blue: Reverse gear

Operation Temperature-20° ~ 70°C (-4° ~ 158°F)


Image Device1/3" image sensor interline transfer CCD

Shutter Control1/60-1/10000sec.

Shutter Step256 step

Chip Size.25(H) x.21(V) inches

Cell Size.38(H) x.30 (V) inches

Sync. SystemInternal sync.

Scanning SystemEIA: 525 Lines/60 Fields CCIR: 625 Lines/50 Fields

S/N RatioMore than 46dB (AGC OFF)

Gamma Correction.045/1 (set to 0.45 before shipment)

Minimum Illumination0.1 Lux/F1.4

Video OutputComposite 1.0 Vp-p / 75 Ohm

Power Consumption2w (Max)

Power Consumption110mA (Max)

Weight (per unit)N.W./G.W.:595g/704g

Power Source12VDC

Operation Temperature-10° ~ 50°C (14° ~ 122°F)

Spec SheetVTS-RV1: Spec Sheet DOWNLOAD 9/27/2016

ManualVTS-RV1: Manual DOWNLOAD 9/27/2016